Construction Notes Manager
for AutoCAD
CNM "Construction Notes Manager" Tutorial - Video Files
Introduction:
Section One: INSTALLING CNM & SETUP
Section Two: TUTORIAL SETUP
Section Three: EDITING PROJECT NOTES
Section Four: INSERTING "BUBBLE NOTES"
Section Five: EDITING BUBBLE NOTES
Section Six: RUNNING "NOTES MANAGER
Section Seven: PHASED CONSTRUCTION NOTES
Section Eight: QUANTITY TAKE-OFF
Section Nine: CNM Editor Configuration
Section Ten: Customizing CNM
Section Eleven: Video Files
INTRODUCTION
The following video clips use the tutorial drawings and show how each procedure is to be done, from start to finish. These files are fairly large, so may take a moment to load.
Note: You will probably need to use the scroll bar to move up and down to watch some of the screen. The videos are a bit "choppy" but still show how things are to be done. They are a little slow to watch, but if you take the time to do it, you will have a good general understanding of what the process is to generate construction notes in your drawings.
Project Setup and Editing the Master Construction Notes File
Inserting Bubble Blocks and Construction Notes into the Site Plan
Inserting Bubble Blocks and Construction Notes into the Utility Plan
Inserting Bubble Blocks and Construction Notes into the Landscape Plan
Inserting the Total Quantities into the Cover Sheet.
(Final Tally)